6-stage Brake Bias Valve

With the 6-stage adjustable brake bias valve, the brake force distribution of a motorsport or racing vehicle can be precisely adjusted. The valve is integrated into the hydraulic brake circuit and allows for quick, reproducible adjustment via the side adjustment lever.

Ideal for track tools, racing vehicles, and custom braking systems where brake behavior needs to be adapted to the vehicle setup, track, or weather conditions.

6-stage Brake Bias Controller for Motorsport

The brake bias valve offers six clearly defined adjustment stages. This allows the braking effect in the connected brake circuit to be adjusted incrementally.

The stepped adjustment makes it easier to re-set a previously found setup. This is particularly practical when changing tires, track conditions, or chassis setups.

Precisely Adjust Brake Force Distribution

A suitably adjusted brake force distribution can contribute to more controllable braking behavior. The control valve is typically used to reduce the hydraulic brake pressure in the connected brake circuit.

This can, for example, reduce premature rear wheel lock-up and better adapt the vehicle to the respective motorsport setup during braking.

Brake Bias Valve with 1/8" NPT Connections

The control valve has inlet and outlet and can therefore be integrated into correspondingly constructed hydraulic brake lines.

Before installation, the existing lines, fittings, and sealing surfaces must be checked for compatibility. Depending on the vehicle and line system, additional adapters or new brake lines may be required.

Advantages of the Adjustable Brake Bias Controller

• Six defined adjustment stages
• Quick adjustment via the integrated lever
• M10x1 connection at inlet and outlet
• Reproducible brake force adjustment
• Compact design for individual motorsport conversions
• Ideal for racing vehicles, track tools, and rally vehicles

Technical Data

• Product type: hydraulic brake bias valve
• Adjustment: 6-stage
• 1/8" NPT
• Actuation: mechanical adjustment lever
• Area of application: motorsport and competition vehicles

Note on Installation and Use

Work on the brake system may only be carried out by qualified personnel. After installation, the brake system must be completely bled and checked for leaks and proper function.

Adjustment should be tested carefully and under controlled conditions. The product is intended for motorsport and competition vehicles. Use on public roads must be checked in advance for compliance with applicable legal requirements.