Reinforcement plates / weld-in plates for rear shock absorbers, suitable for BMW E36 & E46

Reinforcement where the strain is greatest

The reinforcement plates, designed for the rear shock absorber mounts of the BMW E36 and E46, provide structural reinforcement to the rear strut towers , which are subjected to high loads during sporty driving, track days, or drifting. Especially when stiffer suspensions or high-performance setups are installed, the standard mounts can deform, fatigue, or even crack .

❌ The problem in the standard production version

BMW standard suspensions are designed for normal road use — but:

• The rear shock absorber mount is a known weak point under high load.

• A common cause of cracks or warped dome areas

• Expensive body repairs are looming without reinforcements.

✅ The WehranMotorsport solution

Our 3 mm thick steel reinforcement plates are precisely welded to the rear shock absorber mounts, significantly increasing the stability and durability of the rear strut towers. This reinforcement distributes the load over a larger area, preventing deformation and cracking – even under constant track and drift loads.

Your advantage on the route

• ✔ Increased stability of the rear shock absorber mounts

• ✔ Prevents cracks and deformations under high chassis loads

• ✔ Longer lifespan of your body structure

• ✔ Perfectly complemented by chassis and strut tower reinforcements

• ✔ A must-have upgrade for ambitious track tools

⚙️ Technical Details

• Suitable for: BMW E36 & BMW E46

• Position: Rear shock absorber mounts / strut towers

• Material: 3 mm thick steel sheet – ideal for welding

• Design: Sheet metal for the top and bottom of the mount

• Finish: Raw steel – painting/rustproofing after installation is recommended

📦 Scope of delivery

• Reinforcing plates for rear shock absorber mount (4 pcs.)

• Set for left & right (top & bottom)

⚠️ Important information

• Welding is recommended – specialist workshop due to bodywork requirements

• Corrosion protection required after installation

This is a custom-made product and is therefore non-returnable.

The product offered is not an original part from BMW AG .
It is a suitable accessory from an independent manufacturer and is not affiliated with BMW AG .
The use of the terms “BMW”, “E30”, “E36”, etc. serves solely to describe compatibility .

Manufacturer's specifications:

WEHRAN MOTORSPORT

Christophorusweg 8

45659 Recklinghausen

info@wehranmotorsport.com