Skip to product information
Halterung Benzinpumpe / Kraftstoffpumpe Aluminium - WEHRAN MOTORSPORT
1/3

Universal 52 mm Fuel Pump & Filter Bracket with Rubber Isolator – Black Anodized

Item No.: WM-UNI-006

€18,90 EUR
Kunde 1
Unsere Teile sind Verbaut in Projekten von strasse.sport und 249+ weiteren Builds

✔ Secure fastening
✔ Anodized aluminum
✔ Rubber mounting for low vibration

 

Universal 52 mm Fuel Pump & Filter Bracket with Rubber Isolator – Black Anodized

The fuel pump bracket from Wehran Motorsport is a universal mount for inline fuel pumps and fuel filters approx. 52 mm in diameter. An integrated rubber isolator holds the part securely and reduces vibration. The bracket is matte black anodized and designed for mounting an external fuel pump or fuel filter in motorsport, on track days and in race cars.

Fuel pump bracket with rubber isolator: secure, low-vibration fit

A fuel pump runs constantly and vibrates while it does. The integrated rubber isolator dampens these vibrations and keeps the pump firmly in place, even under the loads of track driving.

One bracket does the job, two are recommended

One bracket is enough to mount a fuel pump. For an extra-secure fit, we recommend two brackets per pump, one at each end, so the pump is evenly supported.

For fuel pumps and fuel filters approx. 52 mm in diameter

The bracket has an inner diameter of approx. 52 mm and fits common fuel pumps of this size. You can also use it to mount a fuel filter of the same diameter. Check the outer diameter of your pump or filter before ordering.

Matte black anodized, light and strong

The bracket is lightweight, strong and built for motorsport use. The matte black anodized finish protects against corrosion and gives a clean look.

Universal fit, including interior mounting

This fuel pump bracket is not vehicle-specific and can be installed universally. It is particularly suited to mounting inside the cabin of race cars.

What’s included

    • 1× fuel pump bracket including rubber isolator

 

The product offered is not an original part from BMW AG or other manufacturers mentioned. It is a suitable accessory part from an independent manufacturer. The use of brand names is exclusively for describing compatibility.

Product safety information / manufacturer's information:

WEHRAN MOTORSPORT
Christophorusweg 8
45659 Recklinghausen
+4915568344237
info@wehranmotorsport.com

Warranty & Manufacturer's Guarantee

Your legal guarantee rights

Frequently asked questions about the product

Which fuel pump fits in the bracket?

Fuel pumps and fuel filters with an outer diameter of approx. 52 mm fit into the bracket. Larger pumps with a diameter of 60 mm, which are also common in motorsport, do not fit.

Do I need one or two brackets per fuel pump?

One bracket is sufficient for mounting. For a particularly secure fit, we recommend two brackets per pump, one at each end.

For which vehicles is the fuel pump bracket suitable?

The bracket is universal and not tied to a specific vehicle. You can install it anywhere an external fuel pump or fuel filter with a diameter of approx. 52 mm needs to be securely mounted, including inside race cars.

You might also like this