Steering Rack Stops suitable for BMW E36 – Steering Lock Limiter Pair
Item No.: WM-E36-011
Steering Rack Stops suitable for BMW E36 – 8 mm Steering Lock Limiter Pair
These steering rack stops from Wehran Motorsport are suitable for BMW E36 and reduce the maximum steering lock of the front wheels. They install directly on the steering rack and give you approx. 15 mm more clearance between the tire and the wheel well at full lock. This helps prevent wide tires, wheels with a different offset or spacers from rubbing on the body, suspension or lines. The rack stops are developed in-house by Wehran Motorsport and made in Germany.
Steering lock limiters: approx. 15 mm more wheel well clearance
Wider wheels, spacers, lots of camber or lowered suspension all change the space in the wheel well. At full lock, the tire can then rub on the inner fender, strut, brake lines or brake ducts. The rack stops limit steering travel at the rack, creating approx. 15 mm of extra clearance between tire and wheel well and protecting your tires and wheel well components.
8 mm thick, custom thicknesses on request
The rack stops are 8 mm thick, designed for common track car wheel and tire setups. If your setup needs more or less limiting, we’re happy to make custom thicknesses on request. The steering ratio stays the same, only maximum lock is reduced.
Break-resistant and gentle on the rack
The rack stops are strong, break-resistant and built for high loads, even with performance suspension. Unlike some metal versions, they won’t bend if installed incorrectly, which helps protect your steering rack.
Installation on the steering rack
The rack stops install directly on the steering rack. The tie rod needs to be removed for installation. Mounting hardware and installation instructions are included.
For track days, club racing and the road
The rack stops suit track days, club racing and custom builds just as well as road use. Please note: reducing steering lock increases your turning circle.
What’s included
- 2× steering rack stops, left and right, 8 mm thick each
The product offered is not an original part of BMW AG. It is a suitable accessory part from an independent manufacturer and is not connected to BMW AG. The use of the terms "BMW", "E36", etc. is exclusively for describing compatibility.
Warranty & Manufacturer's Guarantee
Your legal guarantee rights
Frequently asked questions about the product
What is the purpose of a steering angle limiter?
In which cases are steering angle limiters useful?
Does a steering angle limiter affect the handling?
