Skip to product information
Kühlwasser Entlüftungswerkzeug Deckel Überlaufbehälter passend für BMW E30 E36 E46 E39 - WEHRAN MOTORSPORT
1/7

Coolant bleeding tool expansion tank cap fits BMW E30 E36 E46 E39

Item no.: WM-E36-041

€35,00 EUR
Kunde 1
Unsere Teile sind Verbaut in Projekten von strasse.sport und 249+ weiteren Builds

✔ faster, more effective bleeding
✔ reusable tool
✔ plug & play

Adapter
Bleed screw

Coolant bleeding tool with PET bottle or funnel adapter suitable for BMW E30, E36, E46 & E39

The cooling system of many BMW models is difficult to bleed completely after a coolant change or repair. Remaining air bubbles can lead to fluctuating coolant temperatures, poor heating performance, or, in the worst case, engine overheating.

Our coolant bleeding tool replaces the original expansion tank cap during the bleeding process. Depending on the version chosen, a suitable PET bottle can be screwed in directly or the included funnel can be used, which increases the hydrostatic pressure in the system and simplifies bleeding.

The coolant level is significantly above the expansion tank, creating an increased water column. Air bubbles can escape more easily from the BMW cooling system while sufficient coolant flows in continuously.

Coolant bleeding tool for BMW E30, E36, E46 and E39

The practical BMW cooling system tool allows for clean and reliable filling and bleeding. It is particularly suitable after replacing or removing:

  • Radiator
  • Thermostat
  • Water pump
  • Expansion tank
  • Coolant hoses
  • Heater core
  • Coolant

The bleeding tool is installed without making any permanent modifications to the vehicle and can be reused at any time.

Bleeding the cooling system with a PET bottle or funnel

Depending on the version chosen, a suitable PET bottle is screwed directly into the adapter or the included coolant funnel is used. Both variants ensure that the fluid level is above the BMW expansion tank.

The increased water column supports the flow of coolant and makes it easier to remove trapped air from the cooling system.

Advantages of the coolant bleeding tool

  • Facilitates bleeding of the BMW cooling system
  • Practical tool for filling and bleeding
  • Increased coolant level above the expansion tank
  • Consistent refilling of coolant
  • Supports the removal of air bubbles
  • Optionally with PET bottle adapter or bleeding funnel
  • Plug-and-play without permanent modifications
  • Suitable sealing rings already included
  • Reusable and quickly installed
  • Ideal for workshops, motorsport, and private mechanics

Upgrade kit with brass bleeder screw for BMW

The coolant bleeding tool is available upon request as an upgrade kit with a robust brass bleeder screw.

The original BMW bleeder screw is often made of plastic. Over time, it can become brittle, wear out at the screw head, or break when being opened or tightened.

The brass bleeder screw is a durable and resistant alternative to the standard plastic screw. The upgrade is especially suitable for vehicles where the cooling system is regularly bled or maintained.

Suitable for BMW E30, E36, E46 and E39

The coolant bleeding tool can be used for the following BMW series:

  • BMW 3 Series E30
  • BMW 3 Series E36
  • BMW 3 Series E46
  • BMW 5 Series E39

Scope of delivery of the coolant bleeding adapter

Depending on the selected variant:

  • 1× Coolant bleeding cap
  • 1× Adapter for PET bottle or funnel
  • Suitable sealing rings
  • Optional: Brass bleeder screw

Correctly filling and bleeding the E36, E39, E46, E30 cooling system

Remove the original cap from the expansion tank when the engine is cold and install the coolant bleeding tool. Then insert a suitable PET bottle or the funnel, add coolant, and bleed the cooling system according to the manufacturer's instructions.

The increased fluid level ensures that coolant can flow in continuously during the bleeding process. After successful bleeding, the tool is removed and the original sealing cap is reinstalled.

Safety instruction for coolant bleeding

Never open the cooling system while the engine is hot. There is a risk of scalding from hot, pressurized coolant.

The tool is intended solely as a filling and bleeding aid. It must not remain installed while driving.

 

The offered product is not an original part from BMW AG. It is a compatible accessory from an independent manufacturer and has no connection to BMW AG. The use of terms like "BMW", "E36", etc., is solely for the purpose of describing compatibility.

 

 

 

Product Safety Information / Manufacturer Information:

WEHRAN MOTORSPORT
Christophorusweg 8
45659 Recklinghausen
+4915568344237
info@wehranmotorsport.com

Warranty & Manufacturer's Guarantee

Your legal guarantee rights

Frequently asked questions about the product

What is the cooling system bleeder tool used for?

The tool assists in filling and bleeding the cooling system. The increased fluid level allows coolant to flow in continuously, making it easier for trapped air to escape from the cooling system.

Can I use the bleeding tool multiple times?

Yes, the tool is reusable and is suitable for both private hobbyists and regular use in a workshop.

What advantage does the brass bleed screw offer?

The original plastic screw can become brittle, wear out, or break off over time during removal. The optional brass screw is significantly more robust and provides a durable alternative for the regular maintenance of the BMW cooling system.

You might also like this