Skip to product information
Bremsenkühlung Komplettset / Bremsenbelüftung für BMW E36 - WEHRAN MOTORSPORT
1/5

Front Brake Cooling Backing Plates suitable for BMW E36, M3, Compact & Z3

Item No.: WM-E36-001

€109,90 EUR
Kunde 1
Unsere Teile sind Verbaut in Projekten von strasse.sport und 249+ weiteren Builds

✔ Targeted airflow to the brake disc
✔ prevents overheating and severe brake fade
✔ consistent braking performance
✔ made from high-quality stainless steel

Front Brake Cooling Backing Plates suitable for BMW E36, M3, Compact & Z3

These front brake cooling backing plates are an in-house development by Wehran Motorsport, made in Germany. They are suitable for BMW E36 including M3 and Compact, and suitable for BMW Z3. The backing plates replace the stock dust shields and channel fresh air from a 50 mm duct hose straight to the inner face of the rotor. This helps you keep brake temperatures under control on track days, in drifting and in motorsport.

Brake cooling backing plates: cool air straight to the rotor

An air inlet and a duct hose alone don’t make effective brake cooling. With the stock dust shields, most of the airflow ends up in the wheel well and only part of it reaches the brake. The backing plates take the duct hose and channel the cool air to where the heat is generated: the inner face of the brake disc.

More consistent braking on track

Over several hot laps in a row, the front rotors and pads heat up considerably. Targeted cooling helps reduce brake fade and keeps braking performance more consistent over longer sessions. That makes these backing plates a worthwhile part for any E36 track car.

Installation: swap out the stock dust shields

The backing plates replace the stock dust shields on the front axle and mount to the steering knuckle. There’s no need to remove the wheel hub, and you reuse the original bolts.

50 mm duct hose inlet

Each backing plate has a 50 mm hose inlet. Connect a flexible 50 mm duct hose to it to carry fresh air from the air inlet to the brake.

Fitment: suitable for BMW E36 including M3 and Compact, plus Z3

The backing plates are suitable for BMW E36 in all body styles, including M3 and Compact. They are also suitable for BMW Z3.

Designed and made in Germany

These backing plates are developed in-house by Wehran Motorsport and manufactured in Germany. They are durable and corrosion-resistant, with a brushed finish, and hold up long-term to brake temperatures and the conditions in the wheel well.

Part of a complete brake cooling kit suitable for BMW E36

For a complete brake cooling setup, combine the backing plates with matching air inlets and flexible 50 mm duct hoses. All components are also available together as a complete brake cooling kit suitable for BMW E36.

What’s included

  • 1 pair of front brake cooling backing plates, left and right
  • Installation uses the original bolts, which are not included.

The product offered is not an original part of BMW AG. It is a suitable accessory part from an independent manufacturer and is not associated with BMW AG. The use of terms such as “BMW”, “E36” etc. is solely for the purpose of describing compatibility.

Product safety information / manufacturer's information:

WEHRAN MOTORSPORT
Christophorusweg 8
45659 Recklinghausen
+4915568344237
info@wehranmotorsport.com

Warranty & Manufacturer's Guarantee

Your legal guarantee rights

Frequently asked questions about the product

What are backing plates used for?

The anchor plates guide the cooling air precisely to the inside of the brake disc. Without them, the air dissipates uncontrolled in the wheel arch – the cooling effect falls far short of what is possible.

Is wheel hub removal necessary for installation?

No, the backing plates can be installed without disassembling the wheel hub.

What material are the backing plates made of?

The anchor plates are made of ground, stainless steel (VA).

You might also like this